S. van der Zwaag (Sybrand)

Prof. dr. ir. S. van der Zwaag
                                                                                                                             

Faculty of Aerospace Engineering, Room: NB 1.30
Kluyverweg 1
2629 HS Delft, The Netherlands
Tel: +31 (0)15 2782248
Fax. +31 (0)15 2784472
Email: S.vanderZwaag@remove-this.tudelft.nl

 

 

 

Biography

 

Sybrand van der Zwaag studied Metallurgy at the Technical University Delft and obtained his MSc in 1978 after completing his graduation project at the Dutch Nuclear Research Centre. He then joined the Cavendish Laboratory at Cambridge University (UK) and studied the impact damage in glass and infrared transparent ceramics due to supersonic impact with rain drops. He obtained his PhD in 1981. As a post-doc he studied the relaxation kinetics in amorphous metals (metallic glasses). In 1983 he joined Akzo Corporate Research laboratories and worked extensively on the structure-property relations in aramid and other high performance fibres as well as new fibre spinning technologies. In 1992 he was appointed full professor in the field of Microstructural Control in Metals. His research focussed on the austenite-ferrite phase transformation in steels as well as the microstructural changes in aluminium alloys. In this capacity he was one of the founding fathers of the Netherlands Institute for Metals Research NIMR (now M2i). In 2003 he was appointed full professor in the field of  Novel Aerospace Materials, which concentrates its research on the design of novel high performance metals, polymers and polymer fibres, self healing materials and functional composites. Professor Van der Zwaag is also director of the Delft Centre for Materials and chairman of the national IOP program on Self Healing Materials. He has published over 350 ISI publications and supervised 36 PhD students. He is member of the Royal Dutch Society for Sciences and fellow of the (British) Institute of Materials, Minerals and Mining. In 2012 he was granted the honorary title ‘distinguished professor’ by the Board of the Delft University of Technology for his efforts to strengthen the collaboration between the university and industry in the field of materials science.  From January 2014 he will also serve as scientific director of the Dutch Polymer Institute (DPI).

 

 

Current projects

 

His research interests are in the field of micro-structure property relations for novel, not yet existing, materials.  Within this field he focuses on the computational design of novel high performance metals, the developement of self healing (polymeric, metallic and ceramic) materials as well as the development of novel functional composites.
The work is generally of a fundamental nature, but with a clear link  to industrial relevance.

 

 

Secondary employment:

 

Scientific director of the Delft Centre for Materials
Chairman of the national research program on self healing materials,

Scientific director of the Dutch Polymer Institute

Member of the  FOM Valorisation Award committee

Member of the scientific advisory committee NLR-NIVR,

Chairman of the KIVI-NIRIA steering committee for materials

Chairman of the TNO LIFT committee for professorial appointments

Visiting professor at Sheffield University and the AMRC for Aircraft manufacturing

  

Courses at TU Delft

 

AE1204  "Introduction to Thermodynamics"

AE4X02  "Designing Materials for Aerospace Applications"
AE4X03  "Alloy Design"

AE4X04  "Materials Selection in Mechanical Design"

WM0324LR  "Ethics and Technology for Aerospace Engineering"
    

                  

Ph.D. Theses supervised by Prof. S. van der Zwaag

 

 

List of Recent Publications

 

    

Publications 2013

Chen, H and Zwaag, S van der

Analysis of ferrite growth retardation induced by local Mn enrichment in austenite created by prior interface passage

Acta Materialia, 61(4), (2013), 1338-1349

 

Chen, H, Zhu, K, Zhao, L and Zwaag, S van der

Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys

Acta Materialia, 61(14) (2013), 5458-5468

 

Chen, H, Borgenstam, A, Odqvist, J, Zuazo, I, Goune, M, Agren, J and Zwaag, S van der

Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels

Acta Materialia, 61(12) (2013), 4512-4523

 

Lu, Q, Xu, W and Zwaag, S van der

Computational design of precipitation strengthened austenitic heat-resistant steels Philosophical Magazine (London, 2003), 93(25) (2013)., 3391-3412

 

Zhang, S, Kohlbrecher, J, Tichelaar, FD, Langelaan, G, Brück, EH, Zwaag, S van der and Dijk, NH van

Defect-induced Au precipitation in Fe-Au and Fe-Au-B-N alloys studied by in situ small-angle neutron scattering.

Acta Materialia, 61, (2013), 7009-7019

 

Xu, X, Xu, W, Ederveen Hipgrave, F and Zwaag, S van der  

Design of low hardness abrasion resistant steels

Wear, 301(1-2), (2013), 89-93

 

Li, C, Chen, H, Wu, X and Zwaag, S van der  

Effect of strain rate on stress-induced martensitic formation and the compressive properties of Ti-V-(Cr,Fe)- Al

Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 573, (2013), 111-118

 

Chen, H, Gamsjager, E, Schider, S, Khanbareh, H and Zwaag, S van der

In situ observation of austenite-ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

Acta Materialia, 61(7), (2013), 2414-2424

 

Ende, DA van den, Maier, RA, Neer, PLMJ, Zwaag, S van der, Randall, CA and Groen, WA

Modeling and charcaterization of dielectrophoretically structured piezoelectric composites using piezoceramic particle inclusions with high aspect ratios

Journal of Applied Physics, 113(3) (2013), 1-11

 

Blonde, RJP, Jimenez-Melero, E, Zhao, L, Wright, JP, Bruck, E, Zwaag, S van der and Dijk, NH van

Multi length scale characterization of austenite in TRIP steels using high-energy X-ray diffraction.

Powder Diffraction, 28(2) (2013), 77-80

 

Li, S, Xiao, L, Song, G, Wu, X, Sloof, WG and Zwaag, S van der

Oxidation and crack healing behavior of a fine-grained Cr2AlC ceramics

Journal of the American Ceramic Society, 96(3) (2013), 892-899

 

Kunnamkuzhakkal James, N, Ende, DA van den, Lafont, UL, Zwaag, S van der and Groen, WA        

Piezoelectric and mechanical properties of structured PZT-epoxy composites

Journal of Materials Research, 28(4) (2013), 635-641

 

Zhang, S, Schut, H  , Kohlbrecher, J, Langelaan, G, Brück, EH, Zwaag, S van der and Dijk, NH van

Positron annihilation study of ageing precipitation in deformed Fe-Cu-B-N-C

Philosophical Magazine (London, 2003), 93, (2013), 4182-4197

 

He, SM, Brandhoff, PN, Schut, H  , Zwaag, S van der and Dijk, NH van

Positron annihilation study on repeated deformation/precipitation aging in Fe-Cu-B-N alloys

Journal of Materials Science, 48, (2013), 6150-6156

 

Ende, DA van den, Groen, WA and Zwaag, S van der

Robust piezoelectric composites for energy harvesting in high-strain environments

Journal of Intelligent Material Systems and Structures, 24(18) (2013), 2262-2269

 

Ende, DA van den, Fischer, H, Groen, WA and Zwaag, S van der

Switchable static friction of piezoelectric composites - silicon wafer contacts

Applied Physics Letters, 102(4) (2013), 1-4

 

Xu, W, Lu, Q, Xu, X and Zwaag, S van der

The structure of a general materials genome approach to the design of new steel grades for specific properties

Computer Methods In Materials Science, 13(3) (2013), 382-394

 

Bode, S, Bose, RK, Matthes, S, Ehrhardt, M, Seifert, A, Schacher, FH, Paulus, RM, Stumpf, S, Sandmann, B, Vitz, J, Winter, A, Hoeppener, S, Garcia, SJ, Spange, S, Van Der Zwaag, S, Hager, MD, Schubert, US

Self-healing metallopolymers based on cadmium bis(terpyridine) complex containing polymer networks

Polymer Chemistry, 4(18), (2013), 4966-4973

 

Zhang, S, Schut, H, Brück, EH, Zwaag, S van der and Dijk, NH van

Effect of carbon on copper precipitation in deformed Fe-based alloys studied by positron annihilation spectroscopy

Journal of Physics: Conference Series, 443(012027), (2013), 1-4

 

 

      

Publications 2012

Jong, M de, Zwaag, S van der and Sluiter, MHF

Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

International Journal of Materials Research, 103. (2012), 972-979

 

Khanbareh, H, Wu, X, and Zwaag, S van der

Analysis of the fractal dimension of grain boundaries of AA7050 aluminum alloys and its relationship to fracture toughness

Journal of Materials Science, 47(17), (2012), 6246-6253

 

Chen, H, Goune, M and Zwaag, S van der

Analysis of the stagnant stage in diffusional phase transformations starting from austenite-ferrite mixture.

Computational Materials Science, 55, (2012), 34-43

 

Ende, DA van den, Kempen, SE van, Wu, X, Groen, WA,Randall, CA (extern) and Zwaag, S van der 

Dielectrophoretically structured piezoelectric composites with high aspect ratio piezoelectric particles inclusions

Journal of Applied Physics, 111(12), (2012)


Ende, DA van den, Wiel, HJ van de, Groen, WA and Zwaag, S van der

Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

Smart Materials and Structures, 21(1), (2012)

 

Blonde, RJP, Jimenez-Melero, E, Zhao, L, Wright, JP, Bruck, EH, Zwaag, S van der and Dijk, NH van

High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels

Acta Materialia, 60, (2012), 565-577

 

Lafont, UL, Zeijl, HW van and Zwaag, S van der

Increasing the reliability of solid state lighting systems via self healing approaches: A review

Microelectronics Reliability, 52(1), (2012), 71-89

 

Chen, H and Zwaag, S van der

Indirect evidence for the existence of the Mn partitioning spike during the austenite to ferrite transformation

Philosophical Magazine Letters: structure and properties of condensed matter, 92(2), (2012), 86-92

 

Wu, X, Schlangen, E and Zwaag, S van der 

Linking porosity to rolling reduction and fatigue lifetime of hot rolled AA7xxx by 3D x-ray computed tomography

Advanced Engineering Materials, 14(7), (2012), 457-463

 

Li, Shibo, Song, G, Kwakernaak, A, Zwaag, S van der and Sloof, WG

Multiple crack healing of Ti2AIC ceramic

European Ceramic Society. Journal, 32(8), (2012), 1813-1820

 

Rey, R, Javierre, E, Garcia Espallargas, SJ, Zwaag, S van der and Garcia-Aznar, JM

Numerical study of the scratch-closing behavior of coatings containing an expansive layer Surface and Coatings Technology, 206(8-9), (2012), 2220-2225

 

Choi, SW and Zwaag, S van der

Prediction of decarburized ferrite depth of hypoeutectoid steel with simultaneous oxidation.

ISIJ International, 52(4), (2012), 549-558

 

Zwaag, S van der, Brinkman, E and Hees, RPJ van

Schadeherstel: Een zelfherstellend materiaal doet dat nu allemaal zelf

Stedebouw en Architectuur, 2012, 20-23

 

Javierre, E, Garcia Espallargas, SJ, Mol, JMC, Vermolen, FJ, Vuik, C, Zwaag, S van der

Tailoring the releas of encapsulated corrosion inhibitors from damaged coatings: controlled release kinetics by overlapping diffusion fonts

Progress in Organic Coatings, 75(1-2), (2012), 20-27

 

Li, C, Chen, H, Wu, X, Wang, W. and Zwaag, S van der

Tuning the stress induced martensitic formation in titanium alloys by alloy design

Journal of Materials Science, 47(9), (2012), 4093-4100

 

Song, G, Schnabel, V, Kwakernaak, C, Zwaag, S van der,  Schneider, J and Sloof, WG  

High temperature oxidation behaviour of Ti2AlC ceramic at 1200°C

Materials at High Temperatures: materials generation applications, 29(3), (2012), 205-209

          

             

Publications 2011

Blonde, RJP, Jimenez, E, Dijk, NH van, Brueck, EH, Zhao, L, Sietsma, J and Zwaag, S van der

Microstructural control of the austenite stability in low-alloyed trip steels.

Solid StatePhenomena, 172-174, (2011), 196-201

 

Chen, H, Appolaire, B and Zwaag, S van

Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

Acta Materialia, 59(17), (2011), 6751-6760

 

Chen, H and Zwaag, S van der

Modeling of soft impingement effect during solid-state partitioning phase transformations in binary alloys

Journal of Materials Science, 46(5), (2011), 1328-1336

 

Ende, DA van den, Groen, WA and Zwaag, S van der

The effect of calcining temperature on the properties of 0-3 piezoelectric composites of PZT and a liquid crystalline thermosetting polymer

Journal of Electroceramics, 27(1), (2011), 13-19

 

Galgali, GS, Schlangen, E  and Zwaag, S van der

Synthesis and characterization of silica microcapsules using a sustainable solvent system template

Materials Research Bulletin, 46 (12), (2011), 2445-2449

 

Garcia Espallargas, SJ, Fisher, H and Zwaag, S van der

A critical appraisal of the potential of self healing polymeric coatings

Progress in Organic Coatings, 72(3), (2011), 211-221

 

Huang, M, Bouaziz, O and Zwaag, S van

Modelling the strongest grain size in nanocrystalline

FCC metals. Materials Letters, 65, (2011), 3128-3130

 

Jong, M de, Dutta, RK, Sluiter, MHF, Miroux, AG, Zwaag, S van der, Sietsma, J andRivera Diaz del Castillo, PEJ

First-principles and genetic modelling of precipitation sequences in aluminium alloys

Solid State Phenomena, 172-174, (2011), 285-290

 

Li, C, Wu, X, Chen, H and Zwaag, S van der

Influence of alpha morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al

Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 528(18), (2011), 5854-5860

 

Li, S, Yu, WB, Zhai, HX, Song, G, Sloof, WG and Zwaag, S van der

Mechanical properties of low temperature synthesized dense and fine-grained Cr2AlC ceramics

European Ceramic Society. Journal, 31, (2011), 217-224

 

Picken, SJ, Sikkema, DJ, Boerstoel, H, Dingemans, TJ and Zwaag, S van der

Invited topical review: Liquid crystal main-chain polymers for high-performance fibre applications

Liquid Crystals: an international journal in the field of anisotropic fluids, 38, (2011) 1591-1605

 

Song, G, Li, S, Zhao, C, Sloof, WG, Zwaag, S van der, Pei, YT, and Hosson, ThM

Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame

European Ceramic Society, Journal, 31, (2011) 855-862

 

Tjahjanto, DD, Suiker, ASJ, Turteltaub, SR and Zwaag, S van der

Parametric study of multiphase TRIP steels undergoing cyclic loading

Computational Materials Science, 50, (2011), 1490-1498

 

Xu, W, and Zwaag, S van der

Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

ISIJ International, 51(6), (2011) 1005-1010

 

Zwaag, S van der

Sensorial materials - a vision about where progress in sensor integration may lead to

Sensors and Actuators A, 171, (2011), 1-2

 

Zwaag, S van der

Herstel zonder onderhoud

Maintenance Management, 10, (2011), 34-35

 

Zwaag, S van der

Zelfherstellende materialen

Asfalt, 1(38), (2011) 13-14 

 

 

                

Publications 2010

Ende, D.A. van de, B.F Bory, W.A. Groen and S. van der Zwaag.

Improving the d(33) and g(33) properties of 0-3 piezoelectric composites by dielectrophoresis

J. Appl. Phys.   107 (2010),  nr 024107

 

Varley. R.J. S. Shen and S. van der Zwaag

The effect of cluster plasticisation on the self healing behaviour of ionomers

Polymer 51, (2010), 679-686

 

de Ruijter C, van der Zwaag, S., Stolze R, Dingemans TJ

Liquid Crystalline Matrix Polymers for Aramid Ballistic Composites

Pol Compos 31 (2010) 612-619

 

He SM, van Dijk NH, Schut H, and van der Zwaag, S

Thermally activated precipitation at deformation-induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy

Phys Rev B. 81 (2010), 094103   

 

Deng LB, Young RJ and van der Zwaag, S

Characterization of the adhesion of single-walled carbon nanotubes in poly (p-phenylene terephthalamide) composite fibres

Polymer 51 (2010) 2033-2039

 

Mookhoek SD, Mayo SC, Hughes AE, Fischer H and van der Zwaag, S

Applying SEM-Based X-ray Microtomography to Observe Self-Healing in Solvent Encapsulated Thermoplastic Materials
Adv, Eng. Mater. 12 (2010) 228-234

 

Xu W, Rivera-Diaz-del-Castillo PEJ, Wang W and van der Zwaag, S

Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by Ni3Ti intermetallic nanoprecipitates

Acta Mater 58 (2010) 3582-3593

 

Xu W, Rivera-Diaz-Del-Castillo PEJ, Yan W and van der Zwaag, S

A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

Acta Mater 58 (2010) 4067-4075

 

San Martin D, van Dijk NH, Jimenez-Melero E, Brueck, E and van der Zwaag, S

Real-time martensitic transformation kinetics in maraging steel under high magnetic fields

Mater. Sci. Eng A : Struct Mater Props.  527 (2010) 5241-5245

 

Varley, RJ and van der Zwaag, S          

Autonomous damage initiated healing in a thermo-responsive ionomer

Pol Int. 59 (2010) 1031-1038

 

Chen, H and van der Zwaag, S

Application of the cyclic phase transformation concept for investigating growth kinetics of solid-state partitioning phase transformations

Comp. Mater Sci. 49 (2010) 801-813

 

van den Ende DA, Groen WA and van der Zwaag, S

Development of temperature stable charge based piezoelectric composite quasi-static pressure sensors

Sensors and Actuators A- Physical. 163 (2010) 25-31

 

He SM, van Dijk NH, Paladugu M, Brueck E. and van der Zwaag, S

In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering

Phys Rev B. 82 (2010) nr 174111

 

Van den Ende DA, Bory BF, Groen WA, and van der Zwaag, S

Properties of Quasi 1-3 Piezoelectric PZT-epoxy Composites Obtained by Dielectrophoresis

Integr. Ferroelectrics 114 (2010)  108-118

 

Hager, MD, Greil, P, Leyens, C, Zwaag, S van der and Schubert, US

Self-healing materials

Advanced materials, 22, (2010), 5424-5430

 

 

 

                

Publications 2009

Jimenez-Melero E, van Dijk NH, Zhao L, Sietsma J. and Zwaag, S van der 

The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

Acta Mater. 57 (2009) 533-543

 

Xu W, Del Castillo PEJRD  and Zwaag, S van der

Ccomposition and temperature effects in  the UHS stainless steel design

Int. J. Modern Phys. B. 23 (2009) 1060-1065

 

Neelakantan S, Rivera-Diaz-del-Castillo R and Zwaag, S van der

Prediction of the martensite start temperature for beta titanium alloys as a function of composition

Scripta Mater. 60 (2009) 611-614

 

133. Xu W, del Castillo PEJR and Zwaag, S van der

A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

Comp. Mater Sci. 45 (2009) 467-473

 

Tjahjanto D, Turteltaub S, Suiker A, Turteltaub S.R. and Zwaag, S van der

A Micromechanical Study of the Deformation Behavior of TRIP-Assisted Multiphase Steels as a Function of the Microstructural Parameters of the Retained Austenite

Adv. Eng. Mater 11 (2009) 153-157

Zwaag, S van der, Dijk NH, Jonkers HM, Sloof WG, Mookhoek SD

Self-healing behaviour in man-made engineering materials: bioinspired but taking into account their intrinsic character  

Phil Trans. Roy  Soc A- Math. Phys Eng Sci 367 (2009) 1689-1704

 

Javierre E, Vermolen FJ, Vuik C and Zwaag, S van der

Computing Interfaces in Diverse Applications

 Comp Meth Applied Sci. 14  (2009)  327-341   

 

Jacques PJ, Allain S, Bouaziz O and Zwaag, S van der

On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques

Mater Sci Tech. 25 (2009) 567-574

 

Thorat RR, Risanti DD, Martin DS, P.E.J. Rivera and Zwaag, S van der

On the transformation behaviour of NiTi particulate reinforced AA2124 composites  

J. Alloys Compounds. 477 (2009) 307-315

 

Jia YM, Or SW, Chan HLW and Zwaag, S van der

Bidirectional current-voltage converters based on magnetostrictive/piezoelectric composites 

App. Phys. Lett. 94 (2009) 263504

 

Huang MX, Rivera-Diaz-del-Castillo PEJ, Bouaziz O. and Zwaag, S van der

Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation

Acta Mater. 57 (2009) 3431-3438

 

Huang M, Rivera-Diaz-del-Castillo PEJ, Bouaziz O and Zwaag, S van der

Modelling strength and ductility of ultrafine grained BCC and FCC alloys using irreversible thermodynamics  

Mater Sci Techn. 25 (2009) 833-839

 

Huang MX, Rivera-Diaz-del-Castillo PEJ, Perlade A and Zwaag, S van der

Predicting the stress-strain behaviour of carbon steels under hot working conditions: An irreversible thermodynamics model  

Scripta Mater. 61 (2009) 648-651

 

Xu W, Rivera-Diaz-del-Castillo PEJ and Zwaag, S van der

Computational design of UHS maraging stainless steels incorporating composition as well as austenitisation and ageing temperatures as optimisation parameters

 Phil Mag 89 (2009) 1647-1661

 

Javierre E, Vermolen FJ, Vuik C, Van der Zwaag, S

A mathematical analysis of physiological and morphological aspects of wound closure

J. Mathematical Biology 59 (2009) 605-630

 

Huang, M, Castillo, PEJRD del, Bouaziz, O and Zwaag, S van der

A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

Mechanics of materials, 41(9), (2009), 982-988

 

Huang, M, Castillo, PEJRD del, Bouaziz, O and Zwaag, S van der

Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation

Acta materialia, 57(12), (2009), 3431-3438

 

Huang, M, Rivera Diaz del Castillo, PEJ, Perlade, A and Zwaag, S van der 

Modelling the strength of ultrafine-grainde an nanocrystalline FCC metals

Scripta Materials, 61, (2009) 1113-1116

 

Martin, D, Risanti, DD, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

On the production and properties of novel particulate niti/AA2124 metal matrix composites

Materials science and engineering a-structural materials properties microstructure and processing, 528, (2009), 250-252

 

Mookhoek, SD, Fisher, H and Zwaag, S van der

A numerical study into the effect of elongated capsules on the healing efficiency of liquid-based systems

Computational materials science, 47, (2009), 506-511

 

Neelakantan, S, San Martin Fernandez, DM, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

Plasticity induced transformation in a metastable beta Ti-1023 alloy by controlled heat treatments

Materials science and technology, 25(11), (2009), 1351-1358

 

Risanti, DD, Yin, M, Castillo, PEJRD del and Zwaag, S van der

A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

Materials science and engineering a-structural materials properties microstructure and processing, 523(1-2),(2009), 99-111

 

Ruijter, C de, Zwaag, S van der, Stolze, R and Dingemans, TJ

Liquid crystalline matrix polymers for aramid ballistic composites

Polymer composites, (2009), 1-8

 

Huang MX, Rivera-Diaz-del-Castillo PEJ, Perlade A, S. van der Zwaag

Predicting the stress strain behaviour of carbon steels under hot working conditions: an irreversible thermodynamics model

Scripta Materialia, 61 (2009), 648-651

 

 

 

                

Publications 2008

Song GM, Sloof WG, Li SB, Van der Zwaag S

Fabrication and Mechanical Properties of Electroconductive High Temperature ZrC Particle-Reinforced Ti3AlC2 Composites

J. Comp. Theo Nanosci. 5 (2008) SI 1725-1729

 

Varley RJ, Van der Zwaag S. 

Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

Acta Mater. 56 (2008) 5737-5750

 

Varley, R.J. and Zwaag, S van der

Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions

Polymer testing, 27, (2008)  11-19

 

Xu W, Rivera-Diaz-del-Castillo PEJ and Zwaag, S van der

Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics
Comp. Mater Sci. 44 (2008) 678-689

 

Tjahjanto DD, Turteltaub S, Suiker ASJ and Zwaag, S van der

Transformation-induced plasticity in multiphase steels subjected to thermomechanical loading

Phil Mag. 88 (2008) 3369-3387

 

Song GM, Pei YT, Sloof WG,  De Hosson JTM and Zwaag, S van der

Early stages of oxidation of Ti3AlC2 ceramics

Mater Chem Phys. 112 (2008) 762-768

 

Hautakangas, SM, Schut, H, Dijk, NH van, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

Self healing of deformation damage in underaged Al-Cu-Mg alloys

Scripta materialia, 58, (2008) 719-722

 

Huang, M, Rivera Diaz del Castillo, PEJ, Bouaziz, O and Zwaag, S van der

Irreversible thermodynamics modelling of plastic deformation of metals

Materials science and technology, 24(4), (2008)  495-500

 

Micciche, F, Fischer, H, Varley, RJ and Zwaag, S van der

Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase

Surface and coatings technology, 202, (2008) 3346-3353

 

San Martin, D, Aarts, KWP, Rivera Diaz del Castillo, PEJ, Dijk, NH van, Bruck, E and Zwaag, S van der

Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

Journal of magnetism and magnetic materials, 320, (2008) 1722-1728

 

San Martin, D, Dijk, NH van, Brück, E and Zwaag, S van der

The isothermal martensite formation in a maraging steel: a magnetic study

Materials science and engineering A-, 481-482, (2008)  757-761

  

                

 

Publications 2007

Lemmen, HJK, Sudmeijer, KJ, Richardson, IM and Zwaag, S van der

Laser beam welding of an Oxide Dispersion Strengthened super alloy

Journal of materials science, 42(13), 2007, p. 1-10

 

Lok, ZJ, Miroux, AG and Zwaag, S van der

Modelling dispersoid precipitation during recrystallisation in AA3103

Materials science forum, 519-521, 2006, p. 443-448

 

Mecozzi, MG, Sietsma, J and Zwaag, S van der

Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling

Acta materialia, 54, 2006, p. 1431-1440

 

Militzer, M, Mecozzi, MG, Sietsma, J and Zwaag, S van der

Three-dimensional phase field modelling of the austenite-to-ferrite transformation

Acta materialia, 54, 2006, p. 3961-3972

        

Offerman, SE, Dijk, NH van, Sietsma, J, Lauridsen, EM, Margulies, L, Grigull, S, Poulsen, HF and Zwaag, S van der

Phase transformations in steel studied by 3DXRD-microscopy

Nuclear instruments & methods in physics research section b-beam interactions with materials and ato, 246, 2006, p. 194-200

 

Rooijen, RGJ van, Sinke, J, Vries, TJ de and Zwaag, S van der

The bearing strength of fibre metal laminates

Journal of composite materials, 40(1), 2006, p. 5-19

 

Sietsma, J, Mecozzi, MG, Bohemen, SMC van and Zwaag, S van der

Evolution of the mixed-mode character of solid-state phase transformations in  metals involving solute partitioning

Zeitschrift fur metallkunde, 97(4), 2006, p. 356-361

 

Smith, A, Miroux, AG, Sietsma, J and Zwaag, S van der

A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

Steel research international, 77(8), 2006, p. 595-602

 

Smith, A, Kruger, S.E., Sietsma, J and Zwaag, S van der

Laser-ultrasonic monitoring of austenite recrystallization in C-MN steel

Isij international, 46(8), 2006, p. 1223-1232

 

Smith, A, Miroux, AG, Sietsma, J and Zwaag, S van der

Modelling the stress relaxation kinetics of intercritically deformed austenite and ferrite in C-Mn steel

Steel research international, 77(8), 2006, p. 603-613

 

Tjahjanto, DD, Turteltaub, SR, Suiker, ASJ and Zwaag, S van der

Modelling of the effects of grain orientation on transformation-induced plasticity in multiphase carbon steels

Modelling and simulation in materials science and engineering, 14, 2006, p. 617-636

 

Zwaag, S van der, Anselmino, E, Miroux, AG and Prior, DJ

In-situ SEM observations of moving interfaces during recrystallisation

Materials science forum, 519-521, 2006, p. 1341-1348

 

Bohemen, SMC van, Laars, M van der, Sietsma, J and Zwaag, S van der

Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates

International journal of materials research, 98(6), 2007, p. 476-484

 

Bohemen, SMC van, Sietsma, J and Zwaag, S van der

On the nature of the growth of bainitic alpha plates in metastable beta Ti alloy

Materials science forum, 539-543, 2007,  p. 3684-3689

 

Bon, SAF, Mookhoek, SD, Colver, PJ, Fischer, H   and Zwaag, S van der

Route to stable non-spherical emulsion droplets

European polymer journal, 43(11), 2007, p. 4839-4842


Dijk, NH van, Offerman, SE, Sietsma, J and Zwaag, S van der

Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

Acta materialia, 55, 2007, p. 4489-4498

 

Ende, D.A. van den, Almeida, P de and Zwaag, S van der

Piezoelectric and mechanical properties of novel composites of PZT and a liquid crytalline thermosetting resin

Journal of materials science, 42(15), 2007, p. 6417-6425

 

Hautakangas, SM, Schut, H, Zwaag, S van der, Rivera, A and Dijk, NH van

Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys

Physica status solidi c-current topics in solid state physics, 4(10), 2007, p. 469-3472

 

Huang, M, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

Modelling Steady State Deformation of FCC Metals by Non-Equilibrium Thermodynamics

Materials science and technology, 23(9), 2007, p. 1105-1108

 

Huang, M, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

Modelling Deformation Structures in Metals Based on an Entropic Analysis

Materials science forum, 550, 2007, p. 571-576

 

Huang, M, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

Modelling Dynamic Recovery and Recrystallization of Metals by a New Non-Equilibrium Thermodynamics Approach

Materials science forum, 558, 2007, p. 517-522

 

Jimenez-Melero, E, Dijk, NH van, Zhao, L, Sietsma, J, Offerman, SE, Wright, JP and Zwaag, S van der

Martensitic transformation of individual grains in low-alloyed TRIP steels

Scripta materialia, 56, 2007, p. 421-424

 

Jimenez-Melero, E, Dijk, NH van, Zhao, L, Sietsma, J, Offerman, SE, Wright, JP and Zwaag, S van der

Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels

Acta materialia, 55, 2007,p. 6713-6723

 

Lemmen, HJK, Sudmeijer, KJ, Richardson, IM and Zwaag, S van der

Laser beam welding of an oxide dispersion strengthened super alloy

Journal of materials science, 42(13), 2007, p. 5286-5295

 

Miroux, AG, Lok, ZJ, Marthinsen, K and Zwaag, S van der

Solute and second phase evolution during industrial processing of AA3103

Materials science forum, 539-543, 2007, p. 281-286

 

Offerman, SE, Stranglund, H, Dijk, NH van, Sietsma, J, Lauridsen, EM, Margulies, L,

Poulsen, HF, Agren, J and Zwaag, S van der

Ferrite formation during slow continuous cooling in steel

Materials science forum, 550, 2007, p. 357-362

 

Papaefthymiou, S, Prahl, U,  Bleck, W,  Zwaag, S van der and Sietsma, J

Experimental observations on the correlation between microstructure and fracture of multiphase steels

International journal of materials research, 97(12), 2007, p. 1723-1731

 

Prahl, U, Papaefthymiou, S, Uthaisangsuk, V,  Bleck, W, Sietsma, J and Zwaag, S van der

Micromechanics-based modelling of properties and failure of multiphase steels

 Computational materials science, 39, 2007, p. 17-22

 

San Martin, D, Rivera Diaz del Castillo, PEJ, Peekstok, ER and Zwaag, S van der

A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

Materials characterization, 58, 2007, p. 455-460

 

Smith, A, Kruger, SE, Sietsma, J and Zwaag, S van der

Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel

Materials science and engineering a-structural materials properties microstructure and processing, 458, 2007, p. 391-401

 

Song, G, Pei, YT, Sloof, WG, Li, SB, Hosson, ThM and Zwaag, S van der

Oxidation induced crack healing in Ti3AlC2 ceramics

Scripta materialia, 58, 2007, p. 13-16

 

Tjahjanto, DD, Suiker, ASJ, Turteltaub, SR, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

Computational materials science, 41, 2007, p. 107-116

 

Vermolen, FJ, Javierre Perez, E, Vuik, C, Zhao, L   and Zwaag, S van der

A three-dimensional model for particle dissolution in binary alloys

Computational materials science, 39, 2007, p. 767-774

 

Xu, W, San Martin, D, Rivera Diaz del Castillo, PEJ and Zwaag, S van der    

Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

Materials science and engineering a-structural materials properties microstructure and processing, 467(1-2), 2007, p. 24-32

 

Xu, W, San Martin, D, Rivera Diaz del Castillo, PEJ and Zwaag, S van der    

Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

Advanced Materials Research, 15-17, 2007, p. 531-536

 

     

Books

Zwaag, S van der (Ed.).

Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science:

Springer.  (2007).  388 pages

 

Book Chapters

A. Miroux, Z.J. Lok, E. Anselmino and S. van der Zwaag.

Modelling Microchemistry : simulation of alloy effects in Aluminium

In: J. Hirsch. Vitual Fabrication of Aluminium Products. Wiley (2006) p 199-212

 

Zwaag, S van der

Structure and properties of aramid fibres.

In: JWS.Hearle M Jaffe SJ Eichhorn (Ed.), Handbook of  textile fibre structure (1, No. 88) (pp. 394-412), (2009). UK: Woodhead Publishing.

 

S.J. Picken, S.D.Mookhoek, H.R. Fischer and S. van der Zwaag

Self healing in Nanoparticle reinforced polymers and other polymer systems

In: V. Mittal. Optimization of polymer nanocomposite properties. Wiley (2010) pp 261-278

 

O. Kroesen and S. van der Zwaag.

Teaching ethics to engineering students: from clean concepts to dirty tricks

In: I.R. van de Poel, D.E. Goldberg. Philosophy and Engineering. Springer (2010)  pp227-239

 

Zwaag, S van der

Kinetic of phase transformations in steels

In DV Edmonds & E Pereloma (Eds.), Phase transformations in steels,

volume 1:Fundamentals and diffusion-controlled transformations

Woodhead Publishing Limited. (2012) (pp. 126/4.1-156/4.9)

 

Bose, RK, Lafont, UL, Vega Vega, JM, Garcia Espallargas, SJ and Zwaag, S van der

Methods to monitor and quantify (self-) healing in polymers and polymer systems

In WH Binder (Ed.), Self-Healing Polymers, from principles to applications

Weinheim: Wiley-VCH. (2013), (pp. 337-359)

 

Zwaag, S van der, Ende, DA van den and Groen, WA

ensing and energy harvesting novel polymer composites

In E Karana, O Pedgley & V Rognoli (Eds.), Materials experience, fundamentals of materials and design Oxford: Elsevier. (2013), (pp. 221-234)

 

 

        

Patents

 

1.       Zwaag, S. van der, G. Krusemeijer, H. Vegter
         Werkwijze voor de vervaardiging van een vervormingsstaal met goede vervormingseigenschappen en vervormingsstaal van een laag-koolstof
         kwaliteit.
         PCT/NL99/00182

 

2.      Rooijen, RGJ van and Zwaag, S van der.

         Fibre metal laminates and constructions provided therewith. 

         WO 2006/123928 A1.

 

3.       Ende, D.A. van den, Rodrigues de Almeida, PM  , Dingemans, TJ and Zwaag, S van der. Navormbare PZT-LCT sensoren met hoge gevoeligheid en
          thermo-
chemische stabilteit.

          NL 466885-VB.

 

4.       Ende, D.A. van den, Rodrigues de Almeida, PM  , Dingemans, TJ and Zwaag, S van der.

          Load Sensor.

          WO 2007/073184 A1.

 

5.        Fischer, H, Mookhoek, SD and Zwaag, S van der

          Polymeric material comprising multiple cavities. (15-04-2008)  no WO2008/125673 A1.

 

6.        Fischer, H,  Mookhoek, SD and Zwaag, S van der

          Polymeric material having an anisotropic shape, useful in the composite material, which is useful to make an article, comprises multiple cavities
          comprising a functions liquid, which is dicyclopentadiene monomer.
(23-10-2008),  no WO2008125673-A1.

 

7.        Jonkers, HM and Zwaag, S van der

           Healing agent in cement-based materials. (31-01-2008), no EP08100833.

 

8.        Neelakantan, S, Rivera Diaz del Castillo, PEJ and Zwaag, S van der

           Increase in strength of beta Ti-10V-2Fe-3A1 alloy via Plasticity induced Transformation.

           (01-03-2008). no.

 

9.        White SR, Mookhoek, SD, Zwaag, S van der, Sottos, N and Blaiszik, BJ

           Multiple-capsule system and its use for encapsulating active agents. (16-07-2009) no US 2009/0181254/ A1.

 

 

 

Naam auteur: DBD
© 2014 TU Delft

Metamenu